CIRP ANNALS 1980
|
|
|
|
|
STC C |
|
On tapping torque and tap geometry
|
|
G. Lorenz (1)
|
|
STC C, 29/1/1980, P.1
|
|
Keywords: |
Abstract :
|
|
An analytical study of three points grinding methods for general purpose twist drills
|
|
E.J.A. Armarego, J.D. Wright / G. Lorenz
|
|
STC C, 29/1/1980, P.5
|
|
Keywords: |
Abstract :
|
|
Predicting the cutting conditions at which built-up edge disappears when machining plain carbon steels
|
|
P. Mathew, P.L.B. Oxley (1)
|
|
STC C, 29/1/1980, P.11
|
|
Keywords: |
Abstract :
|
|
A new quick-stop device for milling and grinding
|
|
J.G. Wager (1), R.H. Brown (1)
|
|
STC C, 29/1/1980, P.15
|
|
Keywords: |
Abstract :
|
|
A discussion on tool life criteria and total failure causes
|
|
V.C. Venkatesh (1), M. Satchithanandam
|
|
STC C, 29/1/1980, P.19
|
|
Keywords: |
Abstract :
|
|
Investigation in tool life of twist drills
|
|
S. Kaldor, E. Lenz (1)
|
|
STC C, 29/1/1980, P.23
|
|
Keywords: |
Abstract :
|
|
New parting tool system with self-gripping, replaceable carbide inserts
|
|
R. Weill (1), R. Wertheim (2)
|
|
STC C, 29/1/1980, P.29
|
|
Keywords: |
Abstract :
|
|
Detection of cutting tool fracture by acoustic emission measurement
|
|
T. Moriwaki / K. Okushima
|
|
STC C, 29/1/1980, P.35
|
|
Keywords: |
Abstract :
|
|
Chip formation mechanism in single crystal cutting of brass
|
|
K. Ueda, K. Iwata (2) / K. Nakayama
|
|
STC C, 29/1/1980, P.41
|
|
Keywords: |
Abstract :
|
|
Wear characteristics of single crystal diamond tool
|
|
N. Takenaka (1), R. Wada, H. Kodama, K. Nakamura, Y. Mizutani, Y. Shimura
|
|
STC C, 29/1/1980, P.47
|
|
Keywords: |
Abstract :
|
|
Study on the early fracture of carbide tools
|
|
T. Asai, S. Nakatani, A. Hara / T. Sata
|
|
STC C, 29/1/1980, P.53
|
|
Keywords: |
Abstract :
|
|
Study on tool failure of carbide tools in interrupted turning
|
|
N. Negishi, K. Oaki, T. Sata (1)
|
|
STC C, 29/1/1980, P.57
|
|
Keywords: |
Abstract :
|
|
Experimental full cut milling dynamics
|
|
P.E. Gygax / E. Matthias
|
|
STC C, 29/1/1980, P.61
|
|
Keywords: |
Abstract :
|
|
The effect on cutting tool wear of various types of chip control device
|
|
A.H. Redford / A.W.J. Chisholm
|
|
STC C, 29/1/1980, P.67
|
|
Keywords: |
Abstract :
|
|
A new technique for determining the temperature distribution in high speed steel cutting tools using scanning electron microscopy
|
|
B. Mills, D.W. Wakeman, A. Aboukhashaba / A.W.J. Chisholm
|
|
STC C, 29/1/1980, P.73
|
|
Keywords: |
Abstract :
|
|
Chip curl, chip breaking and chip control of the difficult to cut materials
|
|
Y.Z. Zhang / J. Peklenik
|
|
STC C, 29/1/1980, P.79
|
|
Keywords: |
Abstract :
|
|
An experimental investigation of sheet metal drilling
|
|
H. Shikata, M.F. De Vries (2) / E. Merchant
|
|
STC C, 29/1/1980, P.85
|
|
Keywords: |
Abstract :
|
|
Cutting forces in machining with CVD coated indexable carbide inserts
|
|
P. Karapantev / K. Iliev
|
|
STC C, 29/1/1980, P.89
|
|
Keywords: |
Abstract :
|
STC E |
|
Improved adaptive control system for EDM processes
|
|
R. Snoeys (1), D. Dauw, J.P. Kruth
|
|
STC E, 29/1/1980, P.97
|
|
Keywords: |
Abstract :
|
|
Comparison of various erosion systems with rectangular and trapezoidal pulse forms
|
|
H.E. De Bruyn, A.J. Pekelharing (1)
|
|
STC E, 29/1/1980, P.103
|
|
Keywords: |
Abstract :
|
|
Data dependent system approach to EDM process modelling from surface roughness profiles
|
|
S.M. Pandit, K.P. Rajurkar / M.C. Shaw
|
|
STC E, 29/1/1980, P.107
|
|
Keywords: |
Abstract :
|
|
Die Herstellung von Graphitelektroden im Formen - und Gesenkbau mit dem Grafon-EDP-Verfahren
|
|
W. Ullmann / E. Matthias
|
|
STC E, 29/1/1980, P.113
|
|
Keywords: |
Abstract :
|
|
Physical-chemical surface phenomena in EDM process and metal transfer
|
|
G.F. Meshcheriakov (1), N.V. Charuging, L.V. May, N.G. Meshcheriakov
|
|
STC E, 29/1/1980, P.117
|
|
Keywords: |
Abstract :
|
|
Electrolytic hone-forming
|
|
H.R. Victor (1), W.M. Baessler
|
|
STC E, 29/1/1980, P.123
|
|
Keywords: |
Abstract :
|
STC F |
|
Cold forging of hollow cylindrical components having an intermediate flance - Ubet analysis and experiment
|
|
H. Kudo (1), B. Avitzur, T. Yoshikai, J. Luksza, M. Moriyasu, S. Ito
|
|
STC F, 29/1/1980, P.129
|
|
Keywords: |
Abstract :
|
|
Specimen geometry and friction in dynamic compression
|
|
A.J. Holzer / R.H. Brown
|
|
STC F, 29/1/1980, P.135
|
|
Keywords: |
Abstract :
|
|
Extrusion of non-circular section through shaped dies
|
|
J.S. Gunasekera, S. Hoshino / R.H. Brown
|
|
STC F, 29/1/1980, P.141
|
|
Keywords: |
Abstract :
|
|
An extrusion process for uniformly working metals
|
|
L.E. Farmer (2) / P.L.B. Oxley
|
|
STC F, 29/1/1980, P.147
|
|
Keywords: |
Abstract :
|
|
The effect of strain rate on the forming limit diagram for sheet steel
|
|
J.H. Percy / R.H. Brown
|
|
STC F, 29/1/1980, P.151
|
|
Keywords: |
Abstract :
|
|
New directions in sheet metal forming research
|
|
J.L. Duncan (1), T. Altan (1)
|
|
STC F, 29/1/1980, P.153
|
|
Keywords: |
Abstract :
|
|
Physical modelling technique. A means of avoiding faulty designs of sheet metal forming tools
|
|
P.M. Kvist / T. Wanheim
|
|
STC F, 29/1/1980, P.157
|
|
Keywords: |
Abstract :
|
|
Prediction of bending moment of predeformed sheet from uniaxial test results
|
|
Y. Tozawa (2), N. Kanetake, A. Honda / H. Kudo
|
|
STC F, 29/1/1980, P.163
|
|
Keywords: |
Abstract :
|
|
Static and dynamic stiffness of presses and some effects on the accuracy of workpiece
|
|
E. Doege / K. Lange
|
|
STC F, 29/1/1980, P.167
|
|
Keywords: |
Abstract :
|
|
Computer-aided production planning in cold forging
|
|
M. Rebholz / K. Lange
|
|
STC F, 29/1/1980, P.173
|
|
Keywords: |
Abstract :
|
|
Forming on thermoplastics by utilizing their strain recovery phenomena
|
|
T. Machida, T. Okai, T. Nakagawa (2) / N. Taniguchi
|
|
STC F, 29/1/1980, P.179
|
|
Keywords: |
Abstract :
|
|
Analysis of multi-stage deformation within the warm-forming temperature range
|
|
Z. Marciniak / J. Kaczmarek
|
|
STC F, 29/1/1980, P.185
|
|
Keywords: |
Abstract :
|
STC G |
|
Elastic deflections in grinding
|
|
D.P. Saini / R.H. Brown
|
|
STC G, 29/1/1980, P.189
|
|
Keywords: |
Abstract :
|
|
Optimization procedure of three phase grinding cycles of a series without intermediate dressing
|
|
J. Peters (1), R. Aerens
|
|
STC G, 29/1/1980, P.195
|
|
Keywords: |
Abstract :
|
|
Phenomenon of wheel loading mechanisms in grinding
|
|
H. Lauer-Schmaltz, W. KÖnig (1)
|
|
STC G, 29/1/1980, P.201
|
|
Keywords: |
Abstract :
|
|
Process control in internal grinding
|
|
önshoff (1), G. Rohr, G. Althaus
|
|
STC G, 29/1/1980, P.207
|
|
Keywords: |
Abstract :
|
|
Off-line grinding optimization with a micro-computer
|
|
S. Malkin, Y. Koren / A. Ber
|
|
STC G, 29/1/1980, P.213
|
|
Keywords: |
Abstract :
|
|
Adaptive control for conveyor-type belt grinding
|
|
J. Shibata, K. Chao-kun, I. Inasaki, S. Yonetsu / K. Okamura
|
|
STC G, 29/1/1980, P.217
|
|
Keywords: |
Abstract :
|
|
The rating of wheels in laboratory snag grinding
|
|
T. Matsuo, S. Sonoda / H. Tsuwa
|
|
STC G, 29/1/1980, P.221
|
|
Keywords: |
Abstract :
|
|
Sharpness evaluation of grinding wheel face by the grinding of steel ball
|
|
K. Nakayama (1), J. Takagi, E. Irie, K. Okuno
|
|
STC G, 29/1/1980, P.227
|
|
Keywords: |
Abstract :
|
|
Computerized cost analysis of grinding operations
|
|
M. Field (1), R. Kegg (1), S. Buescher
|
|
STC G, 29/1/1980, P.233
|
|
Keywords: |
Abstract :
|
|
A new technique of dressing and conditioning resin bonded superabrasive grinding wheels
|
|
K. Komanduri, W.R. Reed / B.F. Von Turkovich
|
|
STC G, 29/1/1980, P.239
|
|
Keywords: |
Abstract :
|
|
A study of grinding force mathematical model
|
|
L. Lichung, F. Jizai / J. Peklenik
|
|
STC G, 29/1/1980, P.245
|
|
Keywords: |
Abstract :
|
STC M |
|
Dynamic structural identification tasks and methods
|
|
J. Tlusty (1), F. Ismail
|
|
STC M, 29/1/1980, P.251
|
|
Keywords: |
Abstract :
|
|
Vibration analysis test procedure developed for checking machining set-up
|
|
T. Hoshi (2) / T. Sata
|
|
STC M, 29/1/1980, P.257
|
|
Keywords: |
Abstract :
|
|
Functional optimization of spindle bearing systems
|
|
C. Balasubramanyan, S.C. Singhvi, N.K. Seth, A.K. Gangopadhyay / A. Bhattacharyya
|
|
STC M, 29/1/1980, P.263
|
|
Keywords: |
Abstract :
|
|
Machine concentration and noise annoyance in the workshop
|
|
H. Bley, K.G. Guenther (2), J. Haeusler, E.L. Noe / W. Rosenkranz
|
|
STC M, 29/1/1980, P.269
|
|
Keywords: |
Abstract :
|
|
The skiving of ball-bearing tracks
|
|
E.J. Bonikowski, D.J. Chappel, B.H. Stone / A.E. De barr
|
|
STC M, 29/1/1980, P.275
|
|
Keywords: |
Abstract :
|
|
Adaptive control system for turning
|
|
Y. Koren, O. Masory / R. Weill
|
|
STC M, 29/1/1980, P.281
|
|
Keywords: |
Abstract :
|
|
Forecast of the electric energy requirement in a mechanical plant by using a stochastic model
|
|
A. De Filippi (2), R. Ippolito (2) / G.F. Micheletti
|
|
STC M, 29/1/1980, P.285
|
|
Keywords: |
Abstract :
|
|
Design procedure of pneumatic half-floating slideway with load compensation and its application to machining centre
|
|
Y. Furukawa, M. Sato / K. Okamura
|
|
STC M, 29/1/1980, P.289
|
|
Keywords: |
Abstract :
|
|
High speed bearings for machine tool spindles
|
|
F.C. Pruvot / A. Mottu
|
|
STC M, 29/1/1980, P.293
|
|
Keywords: |
Abstract :
|
|
State variable feedback control of hydraulic feed drives
|
|
R.H. Schmutz / E. Matthias
|
|
STC M, 29/1/1980, P.299
|
|
Keywords: |
Abstract :
|
|
A hollow roller bearing for use in machine tool applications
|
|
C.P. Bhateja (2) / R.S. Hahn
|
|
STC M, 29/1/1980, P.303
|
|
Keywords: |
Abstract :
|
|
A laser auto-correcting system of high precision thread grinder
|
|
M.J. Liao, H.Z. Dai, P.Z. Zhang / E. Salje
|
|
STC M, 29/1/1980, P.309
|
|
Keywords: |
Abstract :
|
STC O |
|
Development of flexible optimum process planning procedures
|
|
G. Halevi, R. Weill (1)
|
|
STC O, 29/1/1980, P.313
|
|
Keywords: |
Abstract :
|
|
Investigation of the computer aided classification of parts
|
|
J. Peklenik (1), J. Grum
|
|
STC O, 29/1/1980, P.319
|
|
Keywords: |
Abstract :
|
|
Economics of combined lot and job production with consideration for process variables
|
|
G.L. Ravignani (1), Q. Semeraro
|
|
STC O, 29/1/1980, P.325
|
|
Keywords: |
Abstract :
|
|
Maximising rate of return of investment in batch manufacture
|
|
J.R. Crookall (1)
|
|
STC O, 29/1/1980, P.329
|
|
Keywords: |
Abstract :
|
|
Solution of large scale scheduling problems for job-shop type machining systems with alternative machine tools
|
|
K. Iwata (2), Y. Murotsu, F. Oba / K. Okamura
|
|
STC O, 29/1/1980, P.335
|
|
Keywords: |
Abstract :
|
|
Systematic computer-aided planning of industrial robot application
|
|
H.J. Warnecke (1), R.D. Schraft, U. Schmidt-Streier
|
|
STC O, 29/1/1980, P.339
|
|
Keywords: |
Abstract :
|
|
Problems of robot's interchangeability
|
|
G. Ris, M. Veron (2) / G.F. Micheletti
|
|
STC O, 29/1/1980, P.345
|
|
Keywords: |
Abstract :
|
|
Random strategy methods for determining tool life equations
|
|
E. Kuljanic (2) / V. Solaja
|
|
STC O, 29/1/1980, P.351
|
|
Keywords: |
Abstract :
|
|
Distributed computing systems for multiple-processor industrial control
|
|
N. Duffie, J. Bollinger (1)
|
|
STC O, 29/1/1980, P.357
|
|
Keywords: |
Abstract :
|
|
Design of microprocessor based draughting system
|
|
T.R. Crossley (2), R.E. Unsworth / E. Merchant
|
|
STC O, 29/1/1980, P.363
|
|
Keywords: |
Abstract :
|
|
Generation of NC commands for sculptured surface machining from 3-coordinate measuring data
|
|
S. Kawabe, F. Kimura, T. Sata (1)
|
|
STC O, 29/1/1980, P.369
|
|
Keywords: |
Abstract :
|
STC P(Q) |
|
Influence of errors in wheel and work axes rotation on work piece in cylindrical grinding
|
|
C. Mallanna, T.S.R. Murthy, M.E. Visveswaran / V.C. Venkatesh
|
|
STC P(Q), 29/1/1980, P.373
|
|
Keywords: |
Abstract :
|
|
Precision pitch measuring system of optical fiber array at multiple-fiber connector end
|
|
M. Takashima, K. Baba, S. Yamamura, A. Ushirogawa, T. Shiba / N. Taniguchi
|
|
STC P(Q), 29/1/1980, P.377
|
|
Keywords: |
Abstract :
|
|
A comparison of several plane fit algorithms
|
|
J.J. Hurt / L.V. Colwell
|
|
STC P(Q), 29/1/1980, P.381
|
|
Keywords: |
Abstract :
|
|
Analysis of flatness measurement and form stability of a granite surface plate
|
|
W. De Bruin (2), J. Meijer / R. Van Hasselt
|
|
STC P(Q), 29/1/1980, P.385
|
|
Keywords: |
Abstract :
|
|
Assessment of industrial robots
|
|
H.J. Warnecke (1), M. Weck (1), B. Brodbeck, E. Engel
|
|
STC P(Q), 29/1/1980, P.391
|
|
Keywords: |
Abstract :
|
|
Comparison of modal analysis and holography
|
|
E. Müller, P.E. Gygax / E. Matthias
|
|
STC P(Q), 29/1/1980, P.397
|
|
Keywords: |
Abstract :
|
STC S |
|
The determination of micro-hardness and residual stress of machined ferromagnetic components by using the barkhausen effect
|
|
W. Degner / H. Trumpold
|
|
STC S, 29/1/1980, P.403
|
|
Keywords: |
Abstract :
|
|
Surface properties of polished stainless steel
|
|
Y. Namba, H. Tsuwa (1)
|
|
STC S, 29/1/1980, P.409
|
|
Keywords: |
Abstract :
|
|
Surface topography and functional requirements for dry sliding surfaces
|
|
N.P. Suh (1), H.C. Sin, M. Tohkai, N. Saka
|
|
STC S, 29/1/1980, P.413
|
|
Keywords: |
Abstract :
|
|
Power spectra of rough surfaces obtained by optical Fourier transformation
|
|
E.G. Thwaite / M.J. Puttock
|
|
STC S, 29/1/1980, P.419
|
|
Keywords: |
Abstract :
|
|
Local irregularities of the surface and their influence on surface roughness parameters
|
|
V.S. Loukyanov / D.J. Whitehouse
|
|
STC S, 29/1/1980, P.423
|
|
Keywords: |
Abstract :
|
|
Possibilities and limits of the assessment of random surfaces using two points of the autocorrelation function
|
|
G. Staufert, D.J. Whitehouse (1)
|
|
STC S, 29/1/1980, P.429
|
|
Keywords: |
Abstract :
|
|
In-process and on-line measurement of surface finish
|
|
R.D. Young (1), T.V. Vorburger, E.C. Teague
|
|
STC S, 29/1/1980, P.435
|
|
Keywords: |
Abstract :
|
