CIRP ANNALS 1972
|
|
|
|
|
STC C |
|
Ultra-High-Speed machining
|
|
G. Arndt / R.H. Brown
|
|
STC C, 21/1/1972, P.3
|
|
Keywords: |
Abstract :
|
|
Influence des paramètres de coupe sur les déformations dans la pièce et le copeau
|
|
R. Weill, Y. Couchourel, F. Le Maitre
|
|
STC C, 21/1/1972, P.5
|
|
Keywords: |
Abstract :
|
|
A proposed mechanism for the action of manganese sulphide inclusions on the machinability of resulfurized steels
|
|
A.W.J. Chisholm, W.J. Wilber, E.J. Pattinson
|
|
STC C, 21/1/1972, P.7
|
|
Keywords: |
Abstract :
|
|
Investigation of deformation in high speed orthogonal machining of a plain carbon steel using a ballistic set-up
|
|
V.C. Venkatesh, P.K. Philip
|
|
STC C, 21/1/1972, P.9
|
|
Keywords: |
Abstract :
|
|
Temperature gradient in chip normal to tool face
|
|
E. Lenz, M.Y. Friedman
|
|
STC C, 21/1/1972, P.11
|
|
Keywords: |
Abstract :
|
|
Considérations mathématiques sur la formation du copeau continu en coupe orthogonale
|
|
J.-C. Furrer, P. Dinichert
|
|
STC C, 21/1/1972, P.13
|
|
Keywords: |
Abstract :
|
|
On a class of thermo-mechanical processes during rapid plastic deformation (with special reference to metal cutting)
|
|
B.F. Von Turkovich / M.E. Merchant
|
|
STC C, 21/1/1972, P.15
|
|
Keywords: |
Abstract :
|
|
New methods in the study of plastic deformation in the cutting zone
|
|
J. Buda / J. Kaczmarek
|
|
STC C, 21/1/1972, P.17
|
|
Keywords: |
Abstract :
|
|
Correlations between cutting force components and tool wear
|
|
W. Koenig, K. Langhammer, H.-U. Schemmel
|
|
STC C, 21/1/1972, P.19
|
|
Keywords: |
Abstract :
|
|
Relationship between thermal properties and flank wear of cemented carbide tools
|
|
A. Ber
|
|
STC C, 21/1/1972, P.21
|
|
Keywords: |
Abstract :
|
|
Schneidenverschleiss beim Fräsen von Holzwerkstoffen
|
|
G. Pahlitzsch, K. Dziobek
|
|
STC C, 21/1/1972, P.23
|
|
Keywords: |
Abstract :
|
|
The failure of carbide tools when machining high strength steels
|
|
J. Ellis, G. Barrow / F. Koenigsberger
|
|
STC C, 21/1/1972, P.25
|
|
Keywords: |
Abstract :
|
|
The practical application of machining data
|
|
R. Tilsley
|
|
STC C, 21/1/1972, P.27
|
|
Keywords: |
Abstract :
|
|
Analysis of the correlation among : cutting force variation (vs time) - chip formation parameters - machinability
|
|
A. de Filippi, R. Ippolito / G.F. Micheletti
|
|
STC C, 21/1/1972, P.29
|
|
Keywords: |
Abstract :
|
|
On the mechanism of crater wear of carbide cutting tool
|
|
K. Uehara / A. Kobayashi
|
|
STC C, 21/1/1972, P.31
|
|
Keywords: |
Abstract :
|
|
Selected results from a project on drilling
|
|
V. Solaja, J. Stanic
|
|
STC C, 21/1/1972, P.33
|
|
Keywords: |
Abstract :
|
|
Research for industry/machining cast iron with ceramics
|
|
J.M.B. Orelio / A.J. Pekelharing
|
|
STC C, 21/1/1972, P.35
|
|
Keywords: |
Abstract :
|
|
Testing methods for cutting fluids
|
|
O. Svahn, B. Steen
|
|
STC C, 21/1/1972, P.37
|
|
Keywords: |
Abstract :
|
STC E |
|
Plasma channel diameter growth affects stock removal in EDM
|
|
R. Snoeys, F. Van Dijck / J. Peters
|
|
STC E, 21/1/1972, P.39
|
|
Keywords: |
Abstract :
|
|
Ãœber die Eindringtiefe des Magnetfeldes bei der elektromagnetischen Umformung
|
|
H. Dietz, K.G. Günther, H. Schenk / W. Rosenkranz
|
|
STC E, 21/1/1972, P.41
|
|
Keywords: |
Abstract :
|
|
Electro-chemical machining of heat-resistant alloys
|
|
W. König, H. Degenhardt
|
|
STC E, 21/1/1972, P.43
|
|
Keywords: |
Abstract :
|
|
An experimental analysis of the deep-penetration of electron beam
|
|
N. Taniguchi, T. Miyazaki
|
|
STC E, 21/1/1972, P.45
|
|
Keywords: |
Abstract :
|
|
Laser machining of thin films
|
|
S. Nakayama, K. Takamoto, Y. Saito / N. Taniguchi
|
|
STC E, 21/1/1972, P.47
|
|
Keywords: |
Abstract :
|
|
On the electromagnetic microwave machining of ceramic wafers
|
|
N. Taniguchi, K. Shimomura, T. Miyazaki
|
|
STC E, 21/1/1972, P.49
|
|
Keywords: |
Abstract :
|
|
Beobachtung einiger Vorgänge bei funkenerosiver Bearbeitung mit gesteuerten Generatoren
|
|
J. Stanek, J. Zimanyi / J. Kaczmarek, B.L. Ten Horn
|
|
STC E, 21/1/1972, P.51
|
|
Keywords: |
Abstract :
|
STC F |
|
Experimental determination of normal pressure and friction stress in the rolling gap during cold rolling
|
|
A. Banerji, W.B. Rice
|
|
STC F, 21/1/1972, P.53
|
|
Keywords: |
Abstract :
|
|
Ein Näherungsverfahren zur Berechnung der Temperaturverteilung beim Kaltstauchen von Metallen
|
|
W. Pohl / K. Lange
|
|
STC F, 21/1/1972, P.55
|
|
Keywords: |
Abstract :
|
|
Temperature distribution in hydrostatic extrusion-drawing
|
|
R.M. Guha, B. Lengyel / J.M. Alexander
|
|
STC F, 21/1/1972, P.57
|
|
Keywords: |
Abstract :
|
|
Effect of die angle on the wire drawing process
|
|
A. Bhattacharyya, A.C. Chakraborty, S.R. Deb, B.K. Mullick
|
|
STC F, 21/1/1972, P.59
|
|
Keywords: |
Abstract :
|
|
Forming on asymmetrically located triangular grooves
|
|
G. Perotti / G.F. Micheletti
|
|
STC F, 21/1/1972, P.61
|
|
Keywords: |
Abstract :
|
|
Stability of punch movement in plane-strain backward extrusion of can
|
|
H. Kudo, H. Ito
|
|
STC F, 21/1/1972, P.63
|
|
Keywords: |
Abstract :
|
|
Effect of work hardening on plastic flow of metal in cold hobbing
|
|
S. Takahashi / H. Kudo
|
|
STC F, 21/1/1972, P.65
|
|
Keywords: |
Abstract :
|
|
Influence of die shaps on extrusion pressure and product properties in cold extrusion
|
|
P.O. Strandell, B. Appell, M. Törnblom
|
|
STC F, 21/1/1972, P.67
|
|
Keywords: |
Abstract :
|
|
Process development of wire rolling
|
|
P.O. Strandell, B. Collin
|
|
STC F, 21/1/1972, P.69
|
|
Keywords: |
Abstract :
|
|
A matrix method of analysis for plastic deformation mechanics and its application to visioplasticity
|
|
C.H. Lee, S. Kobayashi
|
|
STC F, 21/1/1972, P.71
|
|
Keywords: |
Abstract :
|
|
Application of semi-graphical solution to multi-ring cold forging die design
|
|
M. Maj / J.G. Ritchie
|
|
STC F, 21/1/1972, P.73
|
|
Keywords: |
Abstract :
|
|
Effort et déformation d'extrusion simultanément directe et inverse
|
|
J. Materniak, F. Tychowski
|
|
STC F, 21/1/1972, P.75
|
|
Keywords: |
Abstract :
|
STC G |
|
The relationship between wheel characteristics and operating problems in high production precision grinding
|
|
R.P. Lindsay, R.S. Hahn
|
|
STC G, 21/1/1972, P.77
|
|
Keywords: |
Abstract :
|
|
Cutting capability of grinding wheels its symptoms and stability
|
|
J. Kaczmarek, Z. Kornberger
|
|
STC G, 21/1/1972, P.79
|
|
Keywords: |
Abstract :
|
|
The influence of dressing on the performance of grinding wheels
|
|
C.P. Bhateja, E.J. Pattinson, A.W.J. Chisholm
|
|
STC G, 21/1/1972, P.81
|
|
Keywords: |
Abstract :
|
|
High temperature grinding of stainless steels
|
|
K. Kishi, H. Eda / Y. Tanaka
|
|
STC G, 21/1/1972, P.83
|
|
Keywords: |
Abstract :
|
|
The mechanism in fine grinding
|
|
W. Sauer, M.C. Shaw
|
|
STC G, 21/1/1972, P.85
|
|
Keywords: |
Abstract :
|
|
Mechanism of abrasive polishing
|
|
L.E. Samuels / R.H. Brown
|
|
STC G, 21/1/1972, P.87
|
|
Keywords: |
Abstract :
|
|
Some aspects of unbalance in the wheel-spindle assembly of cylindrical grinding machines
|
|
G. Trmal, H. Kaliszer / S.A. Tobias
|
|
STC G, 21/1/1972, P.89
|
|
Keywords: |
Abstract :
|
|
Analysis of machining noise in lapping
|
|
M. Ikeda, K. Machida / A. Kobayashi
|
|
STC G, 21/1/1972, P.91
|
|
Keywords: |
Abstract :
|
|
Improving of cutoff characteristics of semi-conductive materials using a newly developed diamond wheel
|
|
A. Kobayashi, N. Komine, S. Kuniyoshi
|
|
STC G, 21/1/1972, P.93
|
|
Keywords: |
Abstract :
|
STC M |
|
Dynamisches Verhalten spanender Werkzeugmaschinen
|
|
M. Weck / H. Opitz
|
|
STC M, 21/1/1972, P.95
|
|
Keywords: |
Abstract :
|
|
Prediction of dynamic cutting coefficients from steady state cutting data
|
|
M.M. Nigm, M.M. Sadek / S.A. Tobias
|
|
STC M, 21/1/1972, P.97
|
|
Keywords: |
Abstract :
|
|
Application of a process control computer for measurement of dynamic cutting coefficients
|
|
H. Opitz, G. Werntze
|
|
STC M, 21/1/1972, P.99
|
|
Keywords: |
Abstract :
|
|
Cutting dynamics associated with vibration normal to cut surface
|
|
T. Hoshi / K. Okushima
|
|
STC M, 21/1/1972, P.101
|
|
Keywords: |
Abstract :
|
|
Unstable vibration analysis of centreless grinding system and remedies for its stabilization
|
|
M. Miyashita / A. Kobayashi
|
|
STC M, 21/1/1972, P.103
|
|
Keywords: |
Abstract :
|
|
A reference test for calculating capability of turning processes
|
|
S.P. Andersen, H.H. Skrede, B. Moseng
|
|
STC M, 21/1/1972, P.105
|
|
Keywords: |
Abstract :
|
|
Die Fräserbahnabweichung und ihre Korrektur bei der Bearbeitung mit einer numerisch gesteuerten Fünfachsenfräsmaschine
|
|
G. Stute, J. Eisinger
|
|
STC M, 21/1/1972, P.107
|
|
Keywords: |
Abstract :
|
|
Méthode de détermination des caractéristiques des paliers hydrostatiques
|
|
J. Lombard, P.J. Duchaine, C. Charcosset
|
|
STC M, 21/1/1972, P.109
|
|
Keywords: |
Abstract :
|
|
Génération des surfaces trochoïdales
|
|
A. Leroy, J.M. Flamme
|
|
STC M, 21/1/1972, P.111
|
|
Keywords: |
Abstract :
|
|
The finite element method for the analysis of machine tool structures
|
|
S. Hinduja, A. Cowley / F. Koenigsberger
|
|
STC M, 21/1/1972, P.113
|
|
Keywords: |
Abstract :
|
|
Assessment of adaptive control effectiveness
|
|
M. Szafarczyk / J. Kaczmarek
|
|
STC M, 21/1/1972, P.115
|
|
Keywords: |
Abstract :
|
|
Analogue simulation of impact dampers
|
|
A. Bhattacharyya, A.B. Chatterjee, S. Ray
|
|
STC M, 21/1/1972, P.117
|
|
Keywords: |
Abstract :
|
|
Theory and experimentation on non-linear servo systems
|
|
A. Cakir, R. Chiappulini
|
|
STC M, 21/1/1972, P.119
|
|
Keywords: |
Abstract :
|
STC Me |
|
Thermisches Verhalten von Werkzeugmaschinen
|
|
G. Spur, H. Fischer, P. de Haas
|
|
STC Me, 21/1/1972, P.121
|
|
Keywords: |
Abstract :
|
|
Analysis of thermal deformation of machine tool by the finite element method
|
|
T. Sata, N. Sato, Y. Takeuchi, N. Takashima / A. Kobayashi
|
|
STC Me, 21/1/1972, P.123
|
|
Keywords: |
Abstract :
|
|
A simple method for separating spindle error from test ball roundness error
|
|
R.R. Donaldson
|
|
STC Me, 21/1/1972, P.125
|
|
Keywords: |
Abstract :
|
|
Interaction wringing force of two wrung block gauges and the resulting dimensional accuracy
|
|
A.M. Hamouda, L.F. Gillemot
|
|
STC Me, 21/1/1972, P.127
|
|
Keywords: |
Abstract :
|
STC O |
|
Planning and utilization of flexible manufacturing systems
|
|
H. Opitz, D. Hormann
|
|
STC O, 21/1/1972, P.129
|
|
Keywords: |
Abstract :
|
|
Das schliessen der Produktivitätslücke durch Informationsautomatisierung
|
|
W. Rosenkranz, H. Ulfers
|
|
STC O, 21/1/1972, P.131
|
|
Keywords: |
Abstract :
|
|
Computers and NC - The alternatives
|
|
L.L. Evans / L.V. Colwell
|
|
STC O, 21/1/1972, P.133
|
|
Keywords: |
Abstract :
|
|
Numerically controlled automatic assembling system
|
|
M. Kamoshida, A. Kobayashi
|
|
STC O, 21/1/1972, P.135
|
|
Keywords: |
Abstract :
|
|
Machining for a fixed demand - An approach to optimization
|
|
G.L. Ravignani / G. Carro Cao
|
|
STC O, 21/1/1972, P.137
|
|
Keywords: |
Abstract :
|
|
Classification of pressed components as an aid to tool design and standardisation
|
|
B. Fogg, G.A. Jamieson, A.W.J. Chisholm
|
|
STC O, 21/1/1972, P.139
|
|
Keywords: |
Abstract :
|
|
Adaptive control in belt grinding
|
|
H. Takeyama, S. Miyazawa, K. Miyasaka
|
|
STC O, 21/1/1972, P.141
|
|
Keywords: |
Abstract :
|
|
Verbesserung von ACC-Systemen durch die Vorgabe ökonomisch begründeter Schnittgeschwindigkeit
|
|
D. Kochan, H.-J. Jacobs, H. Fink / R. Winkler
|
|
STC O, 21/1/1972, P.143
|
|
Keywords: |
Abstract :
|
STC S |
|
Analyse statistique et restitution spectrale des profils de surfaces techniques
|
|
A. Leroy / R. Molle
|
|
STC S, 21/1/1972, P.145
|
|
Keywords: |
Abstract :
|
|
Über die Messung der wahren Berührungsfläsche zwischen zwei sich berührenden rauhen Oberflächen und die Änderung ihrer Rauheit mit der Belastung
|
|
M. Abou-Ali / H. von Weingraber
|
|
STC S, 21/1/1972, P.147
|
|
Keywords: |
Abstract :
|
|
Dir für verschiedene Bezugssysteme ermittelten Unterschiede zwischen der Rauhtiefe Rt, der gemittelten Rauhtiefe RZD und der Zehnpunkthöhe RZI
|
|
H. Demmel / H. von Weingraber
|
|
STC S, 21/1/1972, P.149
|
|
Keywords: |
Abstract :
|
|
A contribution to surface finish evaluation in machining
|
|
V. Solaja
|
|
STC S, 21/1/1972, P.151
|
|
Keywords: |
Abstract :
|
|
The influence of the properties of material being machined upon proper stresses and hardening of the surface layer produced during planing
|
|
J. Kaczmarek, J. Lunarski
|
|
STC S, 21/1/1972, P.153
|
|
Keywords: |
Abstract :
|
