THE INTERNATIONAL ACADEMY FOR PRODUCTION ENGINEERING

CIRP ANNALS 1981

GO TO STC: A   C   Dn   E   F   G   M   O   P   S   Cross-STC  

 STC C 

The minimum energy principle for the cutting process in theory and experiment
J.H. Dautzenberg, P.C. Veenstra (1), A.C.H. Van der Wolf (1)  
STC C,  30/1/1981,  P.1
Keywords:
Abstract :
Cutting tool with curved rake face - A means for breaking thin chips
K. Nakayama (1), M. Arai, T. Kondo, H. Suzuki  
STC C,  30/1/1981,  P.5
Keywords:
Abstract :
Temperature prediction in orthogonal cutting with a finite difference approach
A.J.R. Smith, E.J.A. Armarego (1)  
STC C,  30/1/1981,  P.9
Keywords:
Abstract :
The application of scanning electron microscopy to the study of temperatures and temperature distributions in M2 high speed steel twist drills
B. Mills, T.D. Mottishaw   / A.W.J. Chisholm
STC C,  30/1/1981,  P.15
Keywords:
Abstract :
Chisel-edge modification of small HSS and carbide drills for improved machinability
A. Bhattacharyya (1), A.B. Chattopadhyay, R. Roy  
STC C,  30/1/1981,  P.21
Keywords:
Abstract :
Basic study of high speed micro deep drilling
K. Iwata (2), T. Moriwaki   / T. Hoshi
STC C,  30/1/1981,  P.27
Keywords:
Abstract :
Drilling with twist drills of different cross sections profiles
G. Spur (1), J.R. Masuha  
STC C,  30/1/1981,  P.31
Keywords:
Abstract :
On measurement and interpretation of toughness behaviour of carbide tools
H.J.J. Kals (1)  
STC C,  30/1/1981,  P.37
Keywords:
Abstract :
Study on tool failure of carbide tools in interrupted turning
H. Negishi, K. Aoki, T. Sata (1)  
STC C,  30/1/1981,  P.43
Keywords:
Abstract :
Fundamental approach to the thermal crack of cermet cutting tools
K. Uehara (1), Y. Kanda  
STC C,  30/1/1981,  P.47
Keywords:
Abstract :
Evaluation of fracture strength of brittle tools
M.C. Shaw (1), J. Takagi  
STC C,  30/1/1981,  P.53
Keywords:
Abstract :
Brittle fracture of tool materials characterized by complex structure
H. Takeyama (1)  
STC C,  30/1/1981,  P.59
Keywords:
Abstract :
Turning hardened tool steels with cubic boron nitride inserts
T. Hodgson, P.H.H. Trendler   / G. Ravignani
STC C,  30/1/1981,  P.63
Keywords:
Abstract :
The effects of the dracture, chipping and wear of cemented carbide tools on the determination of the optimum metal cutting conditions
N. Alberti, S. Noto La Diega, A. Passannanti   / G. Carro-Cao
STC C,  30/1/1981,  P.67
Keywords:
Abstract :
Of the theory of diffusion wear
T.N. Loladze (1)  
STC C,  30/1/1981,  P.71
Keywords:
Abstract :
Process models for the incorporation of gear hobbing into an information centre for machining data
K. Bouzakis, W. König (1)  
STC C,  30/1/1981,  P.77
Keywords:
Abstract :
Some power and geometry characteristics of axial skiving
C.R. Giles, M.G. Halliday, B.J. Stone  / A.E. De Barr
STC C,  30/1/1981,  P.83
Keywords:
Abstract :

 STC E 

Electron jet drilling - Basic involved phenomena
R. Ippolito (2), S. Tornincasa, G. Capello   / G.F. Micheletti
STC E,  30/1/1981,  P.87
Keywords:
Abstract :
High precision polishing of semi-conductor materials using hydrodynamic principle
J. Watanabe, J. Suzuki   / A. Kobayashi
STC E,  30/1/1981,  P.91
Keywords:
Abstract :
Adaptive control system for optimizing the ECG process under the overcut constraint
M. Shpitalni,, Y. Koren (2), E. Lenz (1)  
STC E,  30/1/1981,  P.97
Keywords:
Abstract :
Electro-chemical honing of gears. Anew method of gear finishing
C.P. Chen, J. Liu, G.C. Wei, C.B. Wan, J. Wan   / R. Levi
STC E,  30/1/1981,  P.103
Keywords:
Abstract :
The state of the art of ultrasonic machining
D. Kremer, S.M. Saleh, S.R. Ghabrial, A. Moisan (1)  
STC E,  30/1/1981,  P.107
Keywords:
Abstract :
Analysis of electro discharge machining of cemented carbides
S.M. Pandit, K.P. Rajurkar   / M.C. Shaw
STC E,  30/1/1981,  P.111
Keywords:
Abstract :
Effects of carbon content and micro-structures on the current efficiency in case of electro-chemical machining of Fe-C alloys
H. Fukunaga, M. Maruyama   / N. Taniguchi
STC E,  30/1/1981,  P.117
Keywords:
Abstract :
The relation between the copying accuracy and electrolytes of electrochemical machining for titanium alloys
C.Y. Yu, Y.S. Yang, C.K. Cheng   / J.Peklenik
STC E,  30/1/1981,  P.123
Keywords:
Abstract :

 STC F 

Determination of flow stress data for practical metal forming analysis
T. Altan (1), S.L. Semiatin, G.D. Lahoti  
STC F,  30/1/1981,  P.129
Keywords:
Abstract :
A method for determining flow stress under forming conditions
K. Osakada (2), T. Kawasaki, K. Mori   / N. Taniguchi
STC F,  30/1/1981,  P.135
Keywords:
Abstract :
Influence of specimen orientation on the deformation of rings
D. Bhattacharyya   / R.H. Brown
STC F,  30/1/1981,  P.139
Keywords:
Abstract :
Friction determination during bulk plastic deformation of metals
N.A. Abdul   / J.M. Alexander
STC F,  30/1/1981,  P.143
Keywords:
Abstract :
Closed-die forging of rectangular billets with diamond-shaped dies
A.G. Mamalis, K. Osabe, M.C. De Malherbe (1)  
STC F,  30/1/1981,  P.147
Keywords:
Abstract :
Temperature in the die-billet zone in forming
C.R. Boer (2), G. Schroeder   / M. Burgdorf
STC F,  30/1/1981,  P.153
Keywords:
Abstract :
Mechanics of flow forming
H.N. Nagarajan, H. Kotrappa, C. Mallanna   / V.C. Venkatesh
STC F,  30/1/1981,  P.159
Keywords:
Abstract :
Developments in NC-sheet metal bending, especially in NC-roll bending
E. Von Finckenstein, G. Ludowig, G. Zicke   / G. Stute
STC F,  30/1/1981,  P.163
Keywords:
Abstract :
On the adhesion of blanks to the punch in blanking and piercing
E. Dannenmann, S. Sugondo   / K. Lange
STC F,  30/1/1981,  P.167
Keywords:
Abstract :
Roll pressing - New method of metal forming
J. Greskowiak   / J.M. Alexander
STC F,  30/1/1981,  P.171
Keywords:
Abstract :
Internal cracking in symetrically opposed extrusion
J.J. Park, T. Tabata, S. Kobayashi (1)  
STC F,  30/1/1981,  P.175
Keywords:
Abstract :
Theoretical prediction of strainpath dependence of limit strains in sheet materials
S.N. Rasmussen   / T. Wanheim
STC F,  30/1/1981,  P.179
Keywords:
Abstract :
Stretchforming of sheet metal. A mechanism of ductile failure involving diffuse neck interaction
P. Dewhurst   / G. Boothroyd
STC F,  30/1/1981,  P.185
Keywords:
Abstract :
Determination of forming limit diagrams of titanium sheets
R. Arrieux, C. Bedrin   / F. Le Maître
STC F,  30/1/1981,  P.189
Keywords:
Abstract :
Plastic flow, instability and ductile fracture in upsetting of solid cylinders
J.C. Gelin, J. Oudin   / A. Moisan
STC F,  30/1/1981,  P.193
Keywords:
Abstract :
Estimation of the surface strain distribution in upsetting
J.A.G. Kals (1)  
STC F,  30/1/1981,  P.199
Keywords:
Abstract :
Effect of upsetting speed on the upsetting limit
Y. Tozawa (2), T. Kato, N. Kato   / H. Kudo
STC F,  30/1/1981,  P.203
Keywords:
Abstract :
Hydro-mechanical deep-drawing
J. Reissner, p. Hora   / E. Matthias
STC F,  30/1/1981,  P.207
Keywords:
Abstract :
Dynamic analysis of tools for high speed metalworking
P. Huml (2)   / P.O. Strandell
STC F,  30/1/1981,  P.211
Keywords:
Abstract :

 STC G 

The development of an ultrahard abrasive grinding wheel which suppresses chatter
J.S. Sexton, B.J. Stone   / H.K. Tönshoff
STC G,  30/1/1981,  P.215
Keywords:
Abstract :
Problems in profile grinding - angular plunge grinding and surface grinding
E. Salje (1), H.H. Damlos  
STC G,  30/1/1981,  P.219
Keywords:
Abstract :
Grinding cycle optimization
S. Malkin (1)  
STC G,  30/1/1981,  P.223
Keywords:
Abstract :
Manufacturing of a sintered cast iron lapping plate with fixed abrasives and its lapping abilities
Y. Hagiuda, K. Karikomi, T. Nakagawa (2)   / T. Sata
STC G,  30/1/1981,  P.227
Keywords:
Abstract :
Wear characteristic of general and superhard abrasive grains against various hard materials
T. Matsuo (2), K. Okamura  
STC G,  30/1/1981,  P.233
Keywords:
Abstract :
The establishment of the cutting of the diamond wheels in the plane grinding
A.C. Dorin, I.D. Marinescu   / S. Enache
STC G,  30/1/1981,  P.237
Keywords:
Abstract :
Affinity of diamond for metals
T. Tanaka, N. Ikawa (2)   / H. Tsuwa
STC G,  30/1/1981,  P.241
Keywords:
Abstract :
The importance of abrasive grinding wheel hardness control for productivity of production grinding operations
C.P. Bhateja (2)   / R.P. Lindsay
STC G,  30/1/1981,  P.247
Keywords:
Abstract :
The influence of threshold forces on size, roundness and contour errors in precision grinding
R.S. Hahn (1)  
STC G,  30/1/1981,  P.251
Keywords:
Abstract :
About non stationary signal processing. Applications to the study of evolutive solid friction experiments
T. Vinh (1), A. Aouichi, J. Blouet  
STC G,  30/1/1981,  P.255
Keywords:
Abstract :

 STC M 

A new method for determining the thermal contact resistance at machine tool joints
M.H. Attia, L. Kops (2)   / W.B. Rice
STC M,  30/1/1981,  P.259
Keywords:
Abstract :
Investigations in the static and dynamic performance of different end mill locking systems
A. Mannan, B. Lindström (2)   / B. Colding
STC M,  30/1/1981,  P.265
Keywords:
Abstract :
Additive damping treatments for mechanical structures
J. Peters (1), R. Snoeys (1), U. Vandeurzen  
STC M,  30/1/1981,  P.269
Keywords:
Abstract :
Development of an interactive structural analysis system
T. Inamura, T. Sata (1)  
STC M,  30/1/1981,  P.275
Keywords:
Abstract :
Efficient finite-element structural analysis by interactive graphic mesh generation
M. Weck (1), H. Heinrichs  
STC M,  30/1/1981,  P.279
Keywords:
Abstract :
A method to match calculated and identified model parameters of mechanical structures
L.P. Bugeat   / J. Lombard
STC M,  30/1/1981,  P.285
Keywords:
Abstract :
The dynamic characteristics of slideways and its mathematical models
J. Hu   / E. Matthias
STC M,  30/1/1981,  P.289
Keywords:
Abstract :
The establishment of positionning errors influence of the parallel hobbing cutter on the machining accuracy of the spur wheels
S. Enache (1), G. Oproescu, E. Strajescu  
STC M,  30/1/1981,  P.293
Keywords:
Abstract :
Basic non-linearity in machining chatter
J. Tlusty (1), F. Ismail  
STC M,  30/1/1981,  P.299
Keywords:
Abstract :
About damping mechanisms for disk shaped tools
H.K. Tönshoff (1), A. Scherger  
STC M,  30/1/1981,  P.305
Keywords:
Abstract :
Self-guiding action of deep-hole-drilling tools
K. Sakuma, K. Taguchi, A. Katsuki   / H. Takeyama
STC M,  30/1/1981,  P.311
Keywords:
Abstract :
An acoustic lens for signal enhancement in acoustic quality assurance
J.G. Bollinger (1), W. Dornfeld  
STC M,  30/1/1981,  P.317
Keywords:
Abstract :
NC machine tools as electric energy users
A. De Filippi (2), R. Ippolito (2)   / G.F. Micheletti
STC M,  30/1/1981,  P.323
Keywords:
Abstract :
Minor closed loop control of a single-stack variable reluctance stepping moto for high speed positioning
D. French (1), W.J. Vraets  
STC M,  30/1/1981,  P.327
Keywords:
Abstract :
Hydraulic chipbreaching
F.O. Rasch (2), T. Vigeland   / O. Bjoerke
STC M,  30/1/1981,  P.333
Keywords:
Abstract :

 STC M(DC) 

Economics of NC in developing countries like India
M.P. Chowdiah   / A. Bhattacharyya
STC M(DC),  30/1/1981,  P.515
Keywords:
Abstract :
Economics of NC in developing countries like India
M.P. Chowdiah   / A. Bhattacharyya
STC M(DC),  30/1/1981,  P.515
Keywords:
Abstract :

 STC O 

Product design for the economical use of forging
W.A. Knight, C. Poli   / G. Boothroyd
STC O,  30/1/1981,  P.337
Keywords:
Abstract :
Development of programmable precision manufacturing system (PPMS) for small lot production
H. Takeyama (1), K. Sawada, M. Ito, S. Oboshi, K. Asano  
STC O,  30/1/1981,  P.343
Keywords:
Abstract :
Flexible manufacturing systems with automatic transport of tools
J. Zeleny (1)  
STC O,  30/1/1981,  P.349
Keywords:
Abstract :
Workshop programming with CNC turning machines
G. Spur (1), H. Meier  
STC O,  30/1/1981,  P.353
Keywords:
Abstract :
A padl-based numerical control machining data generation program
K.K. Wang, W.P. Wang   / N.P. Suh
STC O,  30/1/1981,  P.359
Keywords:
Abstract :
The development of a technological processor as a part of a workpiece programming system
F.J.A. Van Houten   / H.J.J. Kals
STC O,  30/1/1981,  P.363
Keywords:
Abstract :
A new method of NC interpolation for machining the sculptured surface
T. Sata (1), F. Kimura, N. Okada, M. Hosaka  
STC O,  30/1/1981,  P.369
Keywords:
Abstract :
Adaptive control with process estimation
O. Masory, Y. Koren (2)   / S. Malkin
STC O,  30/1/1981,  P.373
Keywords:
Abstract :
A system to assist in the running of complex industrial process
T.R. Crossley (2)   / E. Merchant
STC O,  30/1/1981,  P.377
Keywords:
Abstract :
Optimizing batch manufacture for multiple products and irregular demand
J.R. Crookall (1)  
STC O,  30/1/1981,  P.383
Keywords:
Abstract :
The laboratory concept of modelling manufacturing cell
V.R. Milacic (2)   / V. Solaja
STC O,  30/1/1981,  P.389
Keywords:
Abstract :
Planning of division of labor in the assembly environment
H.J. Warnecke (1), S. Dittmayer  
STC O,  30/1/1981,  P.395
Keywords:
Abstract :
Sensitivity analysis for macro-economic and micro-economic models of new manufacturing processes
V.A. Tipnis, G.L. Ravignani (1), S.M. Mantel  
STC O,  30/1/1981,  P.401
Keywords:
Abstract :
A comprehensive machining cost model and optimization technique
W.J. Zdeblick, R.E. Devor   / J.F. Kahles
STC O,  30/1/1981,  P.405
Keywords:
Abstract :
Computer aided planning and optimization of cutting data. Time and costs
W. Eversheim (1), W. König (1), W. Schwanborn, H. Wesch, L. Dammer  
STC O,  30/1/1981,  P.409
Keywords:
Abstract :
Optimization of robot structure to increase productivity
B. Katalinic   / G. Sohlenius
STC O,  30/1/1981,  P.413
Keywords:
Abstract :
Off-line programming of numerically controlled industrial robots using the ROBEX-programming-system
W. Eversheim (1), M. Weck (1), H. Scholing, D. Zühlke, W. Muller  
STC O,  30/1/1981,  P.419
Keywords:
Abstract :
The characteristics of a reversible flow vibratory shake table
A.H. Redford, J.M. Eagle   / A.E. De Barr
STC O,  30/1/1981,  P.423
Keywords:
Abstract :

 STC O(DC) 

The present and future trends of production engineering in Singapore
A.Y.C. Nee, V.C. Venkatesh (1)  
STC O(DC),  30/1/1981,  P.519
Keywords:
Abstract :
The present and future trends of production engineering in Singapore
A.Y.C. Nee, V.C. Venkatesh (1)  
STC O(DC),  30/1/1981,  P.519
Keywords:
Abstract :

 STC P(Q) 

Commande adaptive dimensionnelle des machines à mesure 3D
A. Clement (2), P. Bourdet (2)   / R. Weill
STC P(Q),  30/1/1981,  P.429
Keywords:
Abstract :
Verfleichende Betrachtungen über Messgerâte und Massverkörperungen für die Prüfung von Mehrkoordinaten-Messgeräten
W. Beyer, H. Kunzmann (2)   / G. Pahlitzsch
STC P(Q),  30/1/1981,  P.433
Keywords:
Abstract :
Investigations on the variability of the results of measurements realized by multicoordinate measuring machines on circular sections with determined types of roundness errors
L. Nawara (2), M. Kowalski   / J. Kaczmarek
STC P(Q),  30/1/1981,  P.437
Keywords:
Abstract :
A simple approach for evaluation of cylindrical surfaces
T.S.R. Murthy, S.H. Rao   / J. Peters
STC P(Q),  30/1/1981,  P.441
Keywords:
Abstract :
Improvement of working accuracy on NC lathe by compensation for the thermal expansion of tool
T. Sata (1), Y. Takeuchi, M. Sakamoto, M. Weck (1)  
STC P(Q),  30/1/1981,  P.445
Keywords:
Abstract :
Evaluation in sphericity for determining volume of spheres in the highest accuracy
K. Iizuka, M. Goto   / T. Sata
STC P(Q),  30/1/1981,  P.451
Keywords:
Abstract :
Application of a new straightness measurement method to large machine tool
H. Tanaka, K. Tozawa (2), H. Sato (2), M. O-Hori, H. Sekiguchi   / N. Taniguchi
STC P(Q),  30/1/1981,  P.455
Keywords:
Abstract :
Optical testing of bolt type screws
H.J. Warnecke (1), G. Pavel, G. Kuhn  
STC P(Q),  30/1/1981,  P.461
Keywords:
Abstract :
Possibilities and limits for the feed back of dimensional errors by automatic manufacturing
R. Schultschik (1)  
STC P(Q),  30/1/1981,  P.467
Keywords:
Abstract :
Sensing of workpiece diameter, vibration, and out-off-roundness by laser. Way to automate quality control
A. Novak   / B. Colding
STC P(Q),  30/1/1981,  P.473
Keywords:
Abstract :
Discussion on unresolved problems of tolerance technology
C.A. Gladman (1)  
STC P(Q),  30/1/1981,  P.477
Keywords:
Abstract :

 STC S 

Characteristics of two dimensional surface roughness.Taking self-excited chatter marks as objective
H. Sato (2), M. O-Hori   / H. Tsuwa
STC S,  30/1/1981,  P.481
Keywords:
Abstract :
Characteristic shapes and wave length decomposition of surfaces in machining
S.M. Pandit   / M.C. Shaw
STC S,  30/1/1981,  P.487
Keywords:
Abstract :
Investigations of the surface roughness range
B. Nowicki   / J. Kaczmarek
STC S,  30/1/1981,  P.493
Keywords:
Abstract :
Surface finishing of cemented tungsten carbide chip due to ion beam sputter etching
N. Taniguchi (1), I. Miyamoto  
STC S,  30/1/1981,  P.499
Keywords:
Abstract :
A study of the ballizing process
A.Y.C. Nee, V.C. Venkatesh (1)  
STC S,  30/1/1981,  P.505
Keywords:
Abstract :
Optimization of computer controlled X-ray stress analysis
H.K. Tönshoff (1), E. Brinksmeier  
STC S,  30/1/1981,  P.509
Keywords:
Abstract :